خط تولید آب میوه اسپتیک

خط تولید آب میوه اسپتیک

خط تولید آب میوه اسپتیک پت با ظرفیت 54 هزار بطری در ساعت

ساخت کمپانی معتبر کرونس آلمان

شرکت فلات قاره مشاور و تامین کننده ماشین آلات صنایع آشامیدنی

خط تولید آب معدنی، خط تولید آب میوه، خط تولید ماءالشعیر، خط تولید آب آشامیدنی

Aseptic system for low-acid products

Absolute product safety, even under extreme conditions

The PET-Asept L system has proved its worth among beverage producers all over the world. It provides reliable results, even under problematic ambient conditions and, at the same time, requires amazingly low maintenance.

To keep it that way also in future, Krones developers have completely re-designed the system: systematic improvements such as the sliding ring manifolds in the filler or the ultrahygienic capper upgrade the PET-Asept L to state-of-the-art technology.

At a glance

  • Latest version of a system proven all over the world
  • Aseptic filling of low and high-acid products
  • Suitable for all bottle shapes
  • Bottle sterilisation by means of peracetic acid
  • Output up to 65,000 bottles per hour*
  • Particle filling of up to 10x10x10 millimetres possible
  • Also available as PET-AseptBloc L with blow moulder

Benefits to you

Smaller installation surface

  • New, linear machine design
  • Integration of the valve block into the machine frame
  • Unburdened rinser
  • Reduction of the sterilisation modules from three to one

Reduced operation and maintenance work involved

  • Tabletec table top inclined to one side
  • Integration of the valve block into the machine frame
  • New filler in hygienic design

Highly efficient and safe sterilisation

  • Spreader-type nozzles for reliable interior treatment of the containers, even in the neck-finish area
  • No surfactants required
  • Hermetically isolated sterile areas

Energy efficiency and environmental friendliness

  • No surfactants required for better quality of the rinser waste water
  • The single-channel rinser with improved nozzles reduces the air consumption
  • Lower energy consumption thanks to a modified ventilation system

High output

  • Minimum loss of product during type change-over by product supply to the filler from the top
  • Reduced SIP time by steam sterilisation of the filling valves
  • No CIP cups therefore faster and easier operation
  • Product change-over: from the last bottle to the first within a mere 150 minutes